**Nicrodur 500 Sheets and Plates** are top-notch wear-resistant steel products designed to offer outstanding hardness, toughness, and resistance to abrasion. These heavy plates are hot-rolled and then quenched and tempered (or normalized) to create a microstructure that stands up to wear. Nicrodur 500 is well-known for its impressive combination of high hardness along with good weldability, formability, and machinability, making it perfect for components that face harsh abrasive and high-impact conditions. ([baosteelpipes.com][1])
The typical chemical composition and mechanical properties of Nicrodur 500 (which can vary with thickness) include: carbon content around ~0.28–0.34 %, silicon at ~1.0 %, manganese up to ~1.5 %, chromium ranging from ~1.0 to 1.5 %, nickel between ~0.5 and 1.0 %, and molybdenum up to ~0.5 %, all while keeping phosphorus and sulfur within strict limits. ([steelplateindia.com][2]) In its delivered state, Nicrodur 500 plates can show very high hardness, typically around **460–540 HBW**. ([baosteelpipes.com][1]) Their tensile and yield performance is impressive as well, with yield strength reaching up to **≈ 1500 MPa** and tensile strength up to **≈ 1800 MPa**, along with an elongation of about 9 %. ([steelplateindia.com][2])
Item: NICRODUR 500
Thickness : 5mm to 150mm
Length : 6,000mm to 12,000mm
Width : 1,500mm to 2,500mm
Heat Treatment: N, Q+T
Surface Point : EP, PE, HDP, SMP, PVDF
| Plate Thickness [mm] | C max | Si max | Mn max | S max | P max | Cr max | Ni max | Mo max | B max | CEV max | |
| 8 – 25 | 0,28 | 1,0 | 1,5 | 0,002 | 0,012 | 1,0 | 0,5 | 0,5 | 0,005 | 0,61 | |
| (20) – 40 | 0,32 | 1,0 | 1,5 | 0,002 | 0,012 | 1,1 | 0,5 | 0,5 | 0,005 | 0,71 | |
| (40) – 60 | 0,34 | 1,0 | 1,5 | 0,002 | 0,012 | 1,2 | 0,7 | 0,5 | 0,005 | 0,76 | |
| (60) – 80 | 0,40 | 1,0 | 1,5 | 0,002 | 0,012 | 1,5 | 1,0 | 0,5 | 0,005 | 0,81 |
| Yield strength(minimal), Re [MPa] | Tensile strength, Rm [MPa] | Elongation (minimal), A5 [%] | |
| NICRODUR 500 | 1500 | 1800 | 9 |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
| 1/8″ | 3/8″ | 3/4″ | 1-1/2″ | 3″ |
| 3/16″ | 1/2″ | 1″ | 2″ | 4″ |
| 1/4″ | 5/8″ | 1-1/4″ | 2-1/2″ | Â |
| *1/8″ thick plate is available in one size only 60″x 120″. The 3/6″ thick plate is available only as 48″ x 144″ and 96″ x 144″. | ||||
| Thickness | Width | Length |
| 4 | 2000 | 6000 |
| 5 | 2000 | 6000 |
| 6 | 2000 | 6000 |
| 6 | 2500 | 6000 |
| 8 | 2000 | 6000 |
| 8 | 2500 | 6000 |
| 10 | 2000 | 6000 |
| 12 | 2000 | 6000 |
| 15 | 2000 | 6000 |
| 16 | 2000 | 6000 |
| 20 | 2000 | 6000 |
| 25 | 2000 | 6000 |
| 32 | 2000 | 6000 |
| 40 | 2000 | 6000 |
| 50 | 2000 | 6000 |
| 60 | 1800 | 3400 |
FAISAL Steel is a leading manufacturer, supplier and exporter of high-quality Carbon Steel, Alloy Steel, Mild Steel and Galvanized Steel products. Our extensive product range includes Pipes, Tubes, Flanges, Pipe Fittings, Forged Fittings, Sheets and Plates, catering to various industries in Muscat, OMAN.
Copyright 2025 FAISAL Steel. All rights reserved
